Posts Tagged ‘PC Case mod’

     Long time nothing update again, i just busy for moving to new condo and other work so busy. So today i need to update the final picture of my CNC & PC Enclosure.

DIY PC Case , DIY CNC , DIY CNC Enclosure

DIY PC Case , DIY CNC , DIY CNC Enclosure

DIY PC Case , DIY CNC , DIY CNC Enclosure

DIY PC Case , DIY CNC , DIY CNC Enclosure

DIY PC Case , DIY CNC , DIY CNC Enclosure

DIY PC Case , DIY CNC , DIY CNC Enclosure

DIY PC Case , DIY CNC , DIY CNC Enclosure

Back to work with left panel , not many thing to do but a little take time and now my Custom case finish but not 100% i still need to do more wiring and need to use aluminum slot cap to put it in slot by using back color slot cap and will update after finish the slot cap.

Aluminum for hold acrylic
iD2CNC , 
Custom Case build , Case mod , CNC Enclosure

iD2CNC , Custom Case build , Case mod , CNC Enclosure

iD2CNC , Custom Case build , Case mod , CNC Enclosure

Put it in Case
iD2CNC , Custom Case build , Case mod , CNC Enclosure

iD2CNC , Custom Case build , Case mod , CNC Enclosure

iD2CNC , Custom Case build , Case mod , CNC Enclosure

iD2CNC , Custom Case build , Case mod , CNC Enclosure

Start cutting acrylic for font left panel
iD2CNC , Custom Case build , Case mod , CNC Enclosure

iD2CNC , Custom Case build , Case mod , CNC Enclosure

iD2CNC , Custom Case build , Case mod , CNC Enclosure

iD2CNC , Custom Case build , Case mod , CNC Enclosure

iD2CNC , Custom Case build , Case mod , CNC Enclosure

Finish cutting and put it in
iD2CNC , Custom Case build , Case mod , CNC Enclosure

iD2CNC , Custom Case build , Case mod , CNC Enclosure

iD2CNC , Custom Case build , Case mod , CNC Enclosure

Just done new foot base of my case and after waiting for RMA part and it still not in progress , so i decide to sell my other part that still working and bought new one. A little custom mod of my new motherboard to add heatsink to chip. See picture below.

Foot base
CNC , CNPC , iD2CNC , Custom PC

CNC , CNPC , iD2CNC , Custom PC

Custom chip heatsink
Custom PC , iD2CNC

Custom PC , iD2CNC

Custom PC , iD2CNC

Custom PC , iD2CNC

Custom PC , iD2CNC

Custom PC , iD2CNC

Custom PC , iD2CNC

Custom PC , iD2CNC

Custom PC , iD2CNC

Custom PC , iD2CNC

Custom PC , iD2CNC

Custom PC , iD2CNC

Custom PC , iD2CNC

Back to work !!!. For a couple week ago i don’t have time to work with my Case and don’t have time to rest too , busy busy and busy. So today i have 4 hour to rest before back to my routine work again this a little update , i just finish my Case handle.

Case handle
iD2CNC , PC Case Mod , CNC Enclosure

iD2CNC , PC Case Mod , CNC Enclosure

iD2CNC , PC Case Mod , CNC Enclosure

iD2CNC , PC Case Mod , CNC Enclosure

iD2CNC , PC Case Mod , CNC Enclosure

iD2CNC , PC Case Mod , CNC Enclosure

iD2CNC , PC Case Mod , CNC Enclosure

iD2CNC , PC Case Mod , CNC Enclosure

iD2CNC , PC Case Mod , CNC Enclosure

iD2CNC , PC Case Mod , CNC Enclosure

iD2CNC , PC Case Mod , CNC Enclosure

iD2CNC , PC Case Mod , CNC Enclosure

iD2CNC , PC Case Mod , CNC Enclosure

iD2CNC , PC Case Mod , CNC Enclosure

iD2CNC , PC Case Mod , CNC Enclosure

iD2CNC , PC Case Mod , CNC Enclosure

will be back soon….

Still working with wiring everything together

80% Finish wiring
PC Case mod, CNC Enclosure

PC Case mod, CNC Enclosure

PC Case mod, CNC Enclosure

PC Case mod, CNC Enclosure

PC Case mod, CNC Enclosure

PC Case mod, CNC Enclosure

PC Case mod, CNC Enclosure

PC Case mod, CNC Enclosure

My CNPC vs Standard case
PC Case mod , CNC Enclosure

PC Case mod , CNC Enclosure

PC Case mod , CNC Enclosure

PC Case mod , CNC Enclosure

PC Case mod , CNC Enclosure

Next job
PC Case mod , CNC Enclosure

PC Case mod , CNC Enclosure

This my next job to use this resistor to reduce 12v to 8v , to make fan quiet. Actually i need to use PC Fan Control it can adjust voltage but it expensive so i decide to invest with this resistor it very cheap.

Update , Assembly PC.

Assembly
CNC PC Case mod, CNC Enclosure

one of my problem when assembly this case that 4pin PC PSU is to short , i need to extend 4pin wire to connect to motherboard.

CNC PC Case mod, CNC Enclosure

CNC PC Case mod, CNC Enclosure

CNC PC Case mod, CNC Enclosure

CNC PC Case mod, CNC Enclosure

CNC PC Case mod, CNC Enclosure

CNC PC Case mod, CNC Enclosure

CNC PC Case mod, CNC Enclosure

CNC PC Case mod, CNC Enclosure

CNC PC Case mod, CNC Enclosure

CNC PC Case mod, CNC Enclosure

CNC PC Case mod, CNC Enclosure